Astrel Group rialto, Руководство по установке

Страница: 15 / 40

| 15 |
EN
Tools required for installation
/
1 x slotted head screwdriver
/ 1 x cross head screwdriver
/
1 x drill
/ 1 x pair scissors/wire strippers
Safety warnings
All hardware connections must be made by a person who is suitably quali-
fied and aware of the risks associated with installation, observing minimum
standards of safety, and with the equipment isolated from the power supply.
The user accepts all responsibilities and risks connected with the steps of
installing, configuring and using products to the end of obtaining the ben-
efits and advantages they afford. The liability of the Astrel Group in respect
of its products is regulated by the Astrel Group General Conditions of Sale
(published on the company’s website www.astrelgroup.com).
Caution
The R
ialto
S
maRt
R
elay
must be used only indoors and in dry conditions, and
not positioned in places exposed to high levels of humidity and/or water splash.
Maintenance
To clean a
R
ialto
S
maRt
R
elay
, isolate it from the power supply and wipe with
a slightly moist cloth. Do not use solvents. Do not immerse in liquids. Should
the product develop a fault, do not open it up or attempt to repair it, as this
will invalidate the guarantee.