Astrapool HALO LITE2 Скачать руководство пользователя страница 4

4

HALO

®

 LITE

2

   

Installation Manual

Section 1.  Important Safety Instructions

READ AND FOLLOW ALL INSTRUCTIONS

When installing and using this electrical equipment, basic safety precautions should always be followed, 

including the following:

  

WARNING

Risk of electric shock - Install the controller at least 3.5 metres from the inside wall of the pool and/or hot tub using non-

metallic plumbing.
.

SAVE THESE INSTRUCTIONS

     

WARNING

If the supply cord is damaged, it must only be replaced by AstralPool, its service agent or a similarly qualified person, in 

order to avoid a hazard.
The transformer is not intended for series/parallel connection.

Never connect more than one light to a single power supply outlet. Each outlet on the power supply must go to one - and 

one only – underwater light.

     

WARNING

The HALO LITE

2

 power supply has an IP23 rating, meaning it is suitable for installation outdoors. For safe operation the 

power supply must be installed in the correct orientation, with the cables leaving from the bottom of the device. If 

installing the power supply near the pool or spa water, you must ensure that the rules of AS3136 are followed at all times. 

AstralPool strongly recommends that installation be performed by a registered pool builder, electrician or other suitably 

qualified person.

Содержание HALO LITE2













Отзывы: