10
HALO
®
LITE
2
™
installation manual
Section 5. Regular Maintenance
5.1
Insects
The controller is vented to allow the electronics to cool
during extreme warm temperatures. During cooler
months, ants and other insects can be attracted to the
warm, dry environment inside the enclosure.
1.
Turn mains power OFF.
2.
Spray a surface insecticide on the surfaces
surrounding the controller.
3.
Repeat every three months or as necessary.
Section 6. Troubleshooting
PROBLEM
SOLUTION
Colour button is missing from the Home
screen
•
Refer to section 4.2 Configuration/Light Type.
•
Ensure Support Multi Colour is enabled.
Lights don’t change to correct colour
•
Tap the Colour button on the front screen, then tap Sync Current Colour.
•
If this doesn’t correct the problem, refer to section
4.2 Configuration/Light
Type
. Ensure the Light Type selected matches the type of light in your pool.
AUTO button is missing from the Home
screen
•
The AUTO button will only appear on the front screen if at least one Timer is
set to Active.
•
Refer to section
4.2 Configuration/Light Type
for how to set timers.
App won’t connect to
HALO LITE
2
controller
•
Make sure Bluetooth is enabled on your mobile device.
•
Check you are in range of your HALO LITE
2
controller.
•
Make sure the HALO LITE
2
controller is connected and powered on.
•
Ensure Bluetooth and Locations Services are enabled on your mobile device.
•
Turn the power to the HALO LITE
2
controller Off for 10 seconds, then turn
power back On.