9
viron xt series 2 pumps
Installation Manual
8
viron xt series 2 pumps
Installation Manual
Section 3. Getting Started
Install the Viron XT Series 2 Pump in accordance with
the procedures in this manual, local codes and
ordinances, and in accordance with the latest edition
of the appropriate national code. See Section 4.2.
This manual provides the information needed to meet
these requirements. Review all applications and
installation procedures before continuing the
installation.
3.1
Contents
Before starting, check that you have the correct parts as
indicated in Table 1. If any parts are missing or incorrect,
please call your local distributor or technical support at
1300 186 875 for assistance.
1
2*
3*
4*
* XT pump shown with union nut, union tail and o-rings installed.
Figure 3.
Viron XT Series 2 Pump Components
Item
Description
Quantity
1
Viron XT Series 2 Pump
1
2
50 mm Union Nut
2
3
50mm Universal Union Tail
2
4
50mm Universal Union O-ring
2
Table 1. XT Pump Parts
3.2
Technical Specifications
• Power: P320XT - .85 Kw output, 240V 50 Hz, 7.5 Amp,
max speed 2850 rpm; P520XT - 1.5 Kw output,240V
50 Hz, 8.0 amp, max speed 2850 rpm
•
Opera� on from 600 to 2850 rpm + overdrive
(se� ngs per 25 rpm step)
•
Number of programmable speeds: 3
•
Number of programmable � mer se� ngs: 4 per day
•
Flow rate at 8 metres hydraulic head: 120 to
200 litres/Minute at 2850 RPM
•
Opera� ng temperatures: from 2 to 50°C air, and 2 to
35°C water
•
Protec� on index: IPX5
3.3
Required Equipment
Please ensure that the following equipment is
available to the installer at the time of installation.
3.3.1
Required Tools
Safety Eye Wear
Gloves
Philips
Screwdriver
Flathead
Screwdriver
Pipe Wrench
Adjustable
Wrench
5mm (3/16”)
Hex Key
Multi Grips
Digital Differential
Manometer
Voltage Meter PVC Pipe Cutter
Tape Measure
Power Drill
Figure 4.
Required Tools
