41
ixi gas pool and spa heater
Installation Manual
40
ixi gas pool and spa heater
Installation Manual
Section 12. Professional Service and Maintenance
AstralPool strongly recommends that you call a qualified service technician to perform all service and repairs on
the heater. To locate a licensed or qualified technician or independent service company in your area, contact
AstralPool Technical Support at:
1300 186 875
www.AstralPool.com.au
Before servicing the heater:
• Confirm that the heater control is set
to either
POOL
or
SPA
• Confirm the temperature set point for either Pool or Spa is set high enough to make the heater operate given
the current water temperature.
WARNING
SERVICING SAFETY
Service procedures can be hazardous because they
involve fuel gas, electricity, moving parts and procedures
which require testing or temporary bypass of safety
controls. For this reason, the heater must be serviced
only by a qualified professional service technician.
IMPROPER SERVICE HAZARD
The heater incorporates unique design features.
Incorrect service of this heater can result in personal
injury or damage to property. To avoid such hazards, the
heater must be serviced only by a qualified professional
service technician.
12.1 Header Bypass Reassembly Recommendations
If you need to remove the access cover or the VersaFlo housing from the header, use the following torque process
to re-install them to the header. Start each screw by hand and then follow the torque pattern detailed below.
4
3
2
1
5
6
Figure 28.
Header Bypass Reassembly Torque Pattern
