Astralpool Elyo Smart NN 06, Руководство пользователя и обслуживания, Страница: 37 / 293

- 33 -
Press
first, then press to check/adjust the User parameter from P1 to P7
Code with connect Parameter P Description
68769
0CA1 ELYO SMART NN 6.1-2.1
68770
0CA2 ELYO SMART NN 9.2-2.3
68771
0CA3 ELYO SMART NN 12.5-2.9
68772
0CA4 ELYO SMART NN 16-3.8
68774
0CA6 ELYO SMART NN 19-4.7
68775
0CA7 ELYO SMART NN 24-5.9
68776
0CA8 ELYO SMART NN 24-5.9 T
68850
0CF2
ELYO SMART NN 28.5-6.8
68851
0CF3
ELYO SMART NN 28.5-6.8 T
Product code parameter P (Modbus Only): Press + for 5 second, the first digital number flashes, press
or to choose the target number from 0-F, then press go to adjust the second number. So does the
third and forth number. Lastly press to save the setting and exit, or it automatically exit after 15 seconds.
After the setting, the product code parameter P couldn’t be reset, even if system reset,Its setting value is always
retained.
Code Name Scope Default Remark
P0 Mandatory defrosting 0-1 0
0: Default normal operation
1: mandatory defrosting.
P1 Working mode 0-1 1 1:Heating mode, 0:cooling mode,
P2 Timer on/off 0-1 0
1 Timer on/off is under function
，
0 Timer on/off is out
of function (The setting of P5 and P6 won’t work)
P3 Water pump 0-1 0
1:Always running;
0:Depends on the running of compressor
P4 Current time HH:MM
00
：
00
0-23:0-59
P5 Timer on HH:MM
00
：
00
0-23:0-59
P6 Timer off HH:MM 00
：
00 0-23:0-59
P7 Water temp. calibration -9
～
9 0 Default setting: 0
P12 MOBUS COM 0 - 5 0
Modbus Only
（
default value after reset
）
P13 MODBUS ID Address 1 - 88 9 Modbus Only
（
default value after reset
）
7. Start-up of the Heat Pump