S I G N A T U R E
.3. When a schedule is given to replace, maintain or clean certain parts or components of the
Product, the guarantee will only be valid if this schedule has been followed correctly.
LIMITATIONS
3.. This guarantee will apply exclusively to sales made to consumers. A “consumer”, is under-
stood to be the person who acquires the Product for purposes not connected with his profes-
sional activity.
3.. No guarantee is given for the normal wear through using the product. With regard to parts,
components and/or expendable equipment such as mechanical seals, bearings and water tight-
ness, the documentation accompanying the product will be applicable, as the case may be.
3.3. The guarantee does not cover accessory elements of the product “ Filtration pump” not
explicitly included on it, such as panel board, converter, protection devices, etc.
3.4. The guarantee covers Product’s failures originated only and exclusively by materials defect
and/or performance works. The guarantee doesn’t cover cases such us the Product : (i) has been
object of an incorrect handling; (ii) has been installed, repaired, maintained or manipulated for an
non-authorized person or (iii) has been repaired or maintained with non original spares. It’s out
of the present guarantee the slight damages originated by accidental tears or inadequate as:
• Pump working without water.
• Incorrect dosification of chemical products on the swimming pool.
• Water damage originate in external elements to the pumping conditions.
• Inadequate ventilation.
• Use in different applications of swimming pool water filtration.
3.5. The guarantee does not cover cases of incorrect installation or start-up unless said instal-
lation or start-up is included in the sales contract of the Product and has performed by the seller
or under his responsibility. This cases are covered by the installer or the seller who installed the
product.
3.6. The three phase motors include thermistor protection (PTC). They should be connected to
a PTC control module (with the connection diagram depending on the control module chosen
by the installer in each case). Omitting to connect the PTC protection or an error in this connec-
tion invalidates the guarantee in any aspect related to the motor, understanding that it has been
connected incorrectly.
