5
HALO
®
LITE
4
™
Installation Manual
1. Identify a suitable installation location.
NOTE: The distance between the
Halo Lite
4
controller and
the app should be less than 15 meters for a reliable
Bluetooth® connection.
2. Insert the (2) mounting screws into the wall 60
mm apart. Use the (2) plastic masonry plugs
(provided) if mounting into masonry.
3. Hang the power supply on the mounting bracket
and slide it to the right. Check that the power
supply has locked into place by trying to lift it.
3.2
Power Connections
To connect your lights to the power supply:
1. Insert light cable wires into the green terminal
plug. Wires can go into either socket, there is no
polarity.
2. Tighten screws on top to secure.
Figure 3.
Low Voltage Light Terminal Plug
3. Insert each green connector into the bottom of
the Halo Lite
4
controller in any available position.
4. Plug the Halo Lite
4
controller mains cable into a
mains outlet to power on.
Mains Lead
Remote Input
4x Light Outlets
2x RJ Outlets
Zone Select
Switch
Bluetooth®
Antenna
Figure 4.
Power Connector
Section 2. System Overview
2.1
Kit Contents
The Halo Lite
4
controller allows you to control your
pool lights via the Halo Lite app.
Before starting, check that you have the correct parts. If
any parts are missing or incorrect, please call your local
distributor or technical support at 1300 186 875 for
assistance.
a
b
c
e
d
Figure 1.
Kit Contents
Halo LITE kit contents
a. Halo Lite
4
controller
b. Low voltage light terminal plug (4)
c. Screws 8G 3/4 (2)
d. Masonry plug 8G 25mm (2)
e. Mounting Bracket
Section 3. Installation
3.1
Mounting
The Halo Lite
4
power supply mounts using a mounting
bracket.
84
44
Figure 2.
Power Supply mounting bracket
