Supplementary features
28
eud-1399/1.0 – R1.1 – 07.2011
Dialling with redial
You want to call a person you have already called.
In the last-number redial list your phone automatically stores the phone numbers of
the persons you have already called, complete with their names, where available. You
can now call the person in question using this last-number redial list.
The last-number redial list has a maximum of 10 entries.
Dialling with configured softkey
You want to call someone whose phone number is stored under a softkey.
You can call up the user by pressing the corresponding position on the softkey.
To find out how to configure a softkey, refer to the Chapter
, page
Dialling with a configurable key
You want to call someone whose phone number is stored under a configurable key.
You can dial the person by pressing the corresponding key.
To find out how to configure a configurable key, refer to the chapter
.
Press the Redial key.
➔
Redial list is displayed.
Press the redial key several times to scroll through the phone numbers last
dialled.
Pick up the handset.
➔
The phone number displayed is dialled.
Press the configured softkey.
➔
The key’s allocated phone number is shown on the display.
Pick up the handset.
➔
The phone number displayed is dialled.
Note:
The dial procedure is identical when you use a configurable key on an expansion
key module KPU.