SIM installation
The SIM should be inserted in the slot at the rear of the device (with plastic enclosure fitted).
The image on the device gives guidance for correct orientation. Note that the AT200 powers up
when the SIM is fitted. For shipping with SIM fitted, we suggest extracting the SIM a few
millimetres to power off the device.
INSERT SIM HERE
Status LEDs
GPS Status (green):
Constant ON
Searching for initial fix
Double Flash @ 1Hz
GPS 3D navigation
Slow Flash @ 0.2Hz
Lost GPS navigation
GSM Status (blue):
Flash @ rate 1 per sec
GSM ON
Flash @ rate 1 per 3 sec
GSM registered on network
Flash @ rate 3 per sec
GSM Registered with GPRS service
Constant OFF
GSM Modem OFF
Mounting
We recommend mounting the AT200 by either of the following methods:
Double sided foam adhesive tape, using de-greaser / solvent on the vehicle surface
Secure to vehicle using a cable tie, 5.0mm width to suit the cable tie guides on the device
Orientation
For optimum GPS performance, please mount the AT200 with the label facing the sky.