USER Manual
19
of
44
7.8
Dispensing steam
•
Immerse the steam nozzle into
the liquid to be heated;
•
lower the tap lever;
•
to end the delivery, bring the
lever upwards.
Avoid contact with the steam nozzles, do not place your hands or
other body parts near the steam nozzle tips.
To optimally froth the milk, follow these simple rules:
•
Only heat the amount of milk that you intend to use;
once heated, it will have to be completely poured out
of the jug and cannot be reheated;
•
Froth the milk which should be at a temperature of
around 4°C.
To keep the steam nozzle tips in perfect working order, it is
advisable to carry out a brief dry dispensing run after each use.
Keep the tips clean at all times using a cloth dampened in
lukewarm water.
The condensation draining operation must be carried out for
at least 2 seconds before using the steam
nozzle.
Only leave the steam wand immersed in the
milk for the time needed to heat it.
Do not open the steam valve with the steam
wand immersed in milk while the machine
is switched off.
MILK
Continuous
dispensing
COFFEE can be dispensed via
the button under the individual
displays (
13
).
When the button is pressed, the
machine will dispense the type of
coffee pre-set by the manufacturer.
Press the same button again to
stop dispensing.
7.7
Manual coffee dispensing function
(F.R.C. version)
•
Place the cup under the dis-
pensing spout;
•
Lower the lever located next
to the group (14). The amount
of coffee dispensed will be
proportional to the downward
position of the lever;
•
To stop dispensing, push the
lever back up again.
For a better coffee, leave the filter to infuse for a few seconds
using the lever.
Do not remove the filter holder from the dispensing group when
coffee is being dispensed.
The machine is programmed by default. If you would like to modify
the coffee doses, proceed as indicated in para. 8.1 on page 23.
Provided that a group rinse operation has been scheduled, it
is possible to carry it out by pressing the START/STOP button
(continuous supply) or the manual button prior to inserting the
filter holder.
In this case, the 2 buttons must NOT be used to supply coffee, as
the quantity of water produced is not sufficient.
14
7.6
Automatic coffee dispensing function
•
Place the cup under the dis-
pensing spout;
•
press the desired dose button,
e.g.
and wait until the
coffee is dispensed (LED will
switch on);
•
To stop coffee dispensing
ahead of time, press the
button again;
Dispensing time
Pump pressure
Steam pressure
Hot water dispensing
enabled
Temperature
Blue chart:
supply quantity
Red chart:
delivery pressure
The graph represents the exact performance of the pressure in the
pre infusion only if only one dispensing is in effect.
In case of two or more concomitant deliveries, the graph on the
other displays will not indicate the actual pressure value of the
pre infusion, but that of the instantaneous pressure because the
pump is already in operation.
•
In order to continuously dispense coffee, select the
button and stop it by pressing the same
button again.
13
Содержание Storm
Страница 43: ......