Astoria Storm Скачать руководство пользователя страница 12

USER Manual

12

 of 

44

PERMITTED USES

All uses compatible with the techni-

cal features, operations and applications 

described in this document which do 

not endanger the safety of users or cause 

damage to the machine or its surround-

ing environment.

All uses not specifically mentioned in this Manual 

are prohibited and must be expressly authorised 

by the Manufacturer.

INTENDED USES

The machine has been designed exclu-

sively for professional use.

The use of products/materials other 

than those specified by the Manufacturer, 

which can cause damage to the machine 

and be dangerous for the operator and/or 

those in close proximity to the Machine, 

is considered incorrect or improper.

CONTRAINDICATIONS OF USE

The machine must not be used:

• 

For uses other than those listed in para. 

3.4, or for uses that differ from or are not 

mentioned in this Manual;

• 

With materials other than those listed 

in this Manual;

• 

With safety devices that have been 

disabled or are not working.

INCORRECT USE OF THE MACHINE

The type of application and per-

formance that this machine has been 

designed for, requires a number of op-

erations and procedures that cannot 

be changed, unless previously agreed 

with the Manufacturer. Only operations 

discussed in this document are allowed; 

any operation not listed and described 

herein is to be considered improper and, 

therefore, hazardous.

IMPROPER USE

The only permitted uses are described 

in the Manual; any other use is considered 

improper and, therefore, hazardous.

GENERAL SAFETY FEATURES

The user must be aware of accident 

risks, safety devices and the general safety 

rules set forth in EU directives and by the 

legislation of the country where the line 

is installed.

The user must know how all the ma-

chine's devices work.

They must also have fully read this 

Manual.

Maintenance work must be performed 

by qualified technicians after the machine 

has been properly assembled.

The tampering or unauthorised re-

placement of one or more machine com-

ponents, the use of accessories which 

modify its use and the use of materials 

other than those recommended in this 

Manual, can cause accidents.

Содержание Storm













































Отзывы: