Astoria futura +4U, Руководство пользователя

Страница: 49 / 136

49
User manual
ENGLISH
Regeneration notification
If the function has been enabled during program-
ming, the system measures the amount of water
used by the machine and signals on the display
(with the flashing phrase "WATER SOFTENER REGEN-
ERATION") the need for regeneration when the set
amount has been exceeded.
Once the regeneration has been carried out, the
counter must be reset.
14.2 Cappuccino maker
t
Put the suction tube inside the milk;
t
place the jug under the spout of the cappuccino
maker;
t open the steam tap, when the desired amount is
reached close the steam tap;
t
pour the foamed milk into the cups with coffee.
Z
Cleaning
Use special care in cleaning the cappuccino
maker, following the procedures indicated below:
t perform a first washing by immerging the suc-
tion tube in water and run a delivery for a few
seconds;
t turn the rotating body ( X ) 90° to position B (clo-
sure of milk outlet duct);
t
holding the milk suction tube in the air, dispense
steam (cappuccino maker dry run);
t wait about 20 seconds to allow for internal clean-
ing and sterilisation of the cappuccino maker;
t
close the steam and put the rotating body back
in position
A ;
t
if the air intake hole ( Y ) is blocked, clear it gently
with a pin.
X
Y
i
To reset the litres count, contact specialised
personnel.
i
To obtain the dispensing of warm milk without
foam, lift the tab (Z) upwards. For better re-
sults, we suggest not to dispense directly into
the coffee cup, but into a jug or pot, and to then
pour the foamed milk on the coffee. Be sure the
cappuccino maker is kept clean as described in
the chapter "Cleaning".
!
It is advisable to clean the cappuccino maker
after each period of continued use so as to
avoid malfunctions and to ensure a high rate
of hygiene in the system.
Pos.
A
Pos.
B