ASSEMBLY INSTRUCTIONS
2
3
NOTE: Tabs and notches on fountain parts are
different sizes, so they must match up
correctly to secure.
1.
(SEE FIGURE 1)
Place the base pedestal (A) on
flat, level surface. Put the large basin (B) on the
base pedestal (A) aligning the tabs of the basin
with the notches in the top of the base. Turn the
large basin counter clockwise to lock into place.
Put the electric pump (E) into the center ring in
the bottom of large basin (B) beside the PVC
tube. Place the power cord of the pump (E)
through the PVC tube, the pedestal base (A)
and out the bottom of the base as shown.
A Base
Pedestal
1
B Large
Basin
1
C Center
Pedestal
1
D Top
Basin
1
E
Electric Pump
1
PARTS & HARDWARE LIST
PART #
PART #
DESCRIPTION
QUANTITY
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
B
D
C
Parts Detail
A
E
2.
(SEE FIGURE 2)
Connect center pedestal (C) to
large basin (B) by aligning the tab of the large
basin with the notch in the bottom of the
center
pedestal.
C
E
Figure 1
Figure 2
A
B
A
B
Basin Tab
Base Notch
Power Cord
Power Cord
E
Basin
Tab
F
NOTE
: This product is intended for residential, non-commercial use.
