Steam
The unit is equipped with a built-in steam generator. It is important that you
understand how the unit operates before you use it. Read and follow these
instructions.
WARNING:
1.To reduce risk of injury, do not permit children to use the unit unless they
are closely supervised
2.To reduce risk of injury consult your physician before using the unit of you
have pre-existing health conditions such as obesity, heart disease, high or low
blood pressure, circulatory problems, or diabetes. Pregnant women, the
elderly, and infants should use caution and get physician approval before
using the unit.
3.Observe reasonable time limits when using this product. Long exposures at
high temperatures can cause high body temperatures. Symptoms may include
dizziness, nausea, fainting, drowsiness, and reduced awareness. These
effects could possibly result in drowning.
4.Pregnant or possibly pregnant women should consult a doctor before using a
hydro massage bathtub equipped with a heater to avoid risk of fetal injury.
5.Prolonged immersion in hot water may induce hyperthermia. A description of
the cause, symptoms, and effects of hyperthermia are as follows:
A. Lack of awareness of impending hazard;
B. Failure to perceive heat;
C. Failure to recognize the need to exit the unit;
D. Fetal damage in pregnant women;
E. Unconsciousness and danger of drowning
To operate the steam generator use the following instructions
:
1. Press the main “on/off” button to turn on the power.
2. Press the “steam” button to start the steam generator. Once you start the
steam generator, it will automatically fill with water and will produce steam
within three (3) to five (5) minutes.
NOTE:
The default time is 60 minutes and the default temperature is 104 F (40
C).
The unit will produce steam and raise the internal temperature to your set point.
Once your set temperature is reached, the steam will stop. The tolerance of
thetemperature is +/- 2 F; therefore, as long as you have time for the steam cycle
the unit will maintain your set temperature.
40
