1. The shower wand hose has two tapered ends. One end has an O-ring around
the outside. This o-ring indicates the end of the hose with the vacuum break
diaphragm, used to prevent potential back flow and contamination of the
drinking water. Install the end of the hose with the o-ring onto the outlet spout
for the shower wand located on the wall of the unit.
2. The remaining hose end goes onto the shower wand. Install the rubber gasket
provided between the hose the shower wand.
3. Place the shower wand into the wand holder.
Step 14 Install the shower wand and hose
30
