7.
CAUTION:
The flexible drain should have a level or slight grade to allow free
and easy flow to the floor drain. Failure to do so can cause possible leaks
and flooding.
8.
WARNING:
It is recommended that the exhaust fan provided with the unit be
vented to the outside to provide proper steam ventilation after use.
9. In order to avoid any unwanted movement, the unit should be installed on a
properly supported flat and level non-slip surface.
Before starting the installation, please ensure that you have inspected all
components of the unit and check for broken or damaged sections. If you find
damage, please contact your dealer or the manufacturer.
These installation instructions assume you have already completed the following
works:
Rough plumbing for both the hot and cold supply lines
Placing of the floor drain
You will need the following tools:
Drill with screwdriver attachments
Caulk gun
Level (3 foot or longer is recommended)
Tape measure
Box and open end wrenches or socket set (metric)
Phillips head screw driver
Flat head screw driver
Bathroom rated silicone sealant
Adjustable wrench
Plumbing Requirements
:
Installation by a Licensed plumber
Water pressure: 50 - 70 psi
Flow rate: 6-10 GPM (gallons per minute)
For hose connection male 3/8: compression fitting threads
10
Rough electrical for the unit
