Aston Global SEB976, Инструкция по установке и эксплуатации

Страница: 9 / 27

Shower Door Installation
1. Measure the width of the shower opening at the top between the fixed glass
and the wall. Note this is dimension "X".
2. The following equation is used to determine the length to be cut from the rail in
order to fit the shower opening.
Y = X- 1"
3. Measure distance "Y" from the end of Top Rail (2) with pre-assembled hardware
mark the top rail.
NOTE: Do not cut the end of top rail with pre-assembled hardware. Only cut the
end of top rail opposite the pre-assembled hardware.
4. Using a hacksaw or jigsaw cut the Top Rail (2) at the mark. Carefully remove
any burrs or sharp edges remaining on Top Rail (2) after the cutting.
8