Aston Global SEB976, Инструкция по установке и эксплуатации

Страница: 8 / 27

Install the glass clamp and glass
Using the appropriate drill bit for your wall and floor surface drill each hole location
with a 5/16" diameter drill bit. Install the plastic wall anchors provided into the drilled
holes
NOTE: If your surface is prone to cracking or chipping then it is
recommended that you pilot drill first using a smaller drill bit, and then step up
to the final size.
Using screw pack (1) attach the glass clamps (8) to wall and shower floor using
M4x40 screws. Screw Pack 1. The glass clamps (8) should be positioned so that the
single hole is facing toward the inside of shower.
7