ASTi Synapse Voisus Server Manual (Ver. 1, Rev. F1)
Copyright © 2012 Advanced Simulation Technology inc.
65
8. Select ‘Finish’ and launch the Voisus VBS2 Manager.
9. The Voisus VBS2 Manager finds all of the VBS2 installations and missions on the com-
puter. Select to ‘Enable Voisus for
X
installations and
Y
missions’ if you would like Voisus
installed on all VBS2 installations and missions found.
To install Voisus on specific installations and missions select ‘Manage installations and
missions’ and continue to step 10.
To enable Voisus you must first enter the IPv4 address of the Voisus Server.
Note
: If you do not know the IP address you may enter a placeholder address and relaunch
the manager at a later time to enter the Voisus Server IP address. The IP address is
required
for communications.
