ASTi ACU2, Техническое руководство пользователя, Страница: 34 / 37

10.0 Specifications
This chapter describes the following ACU2 (v2) specifications:
l
Power requirements
l
Memory devices
l
Temperature and humidity ranges
10.1 Power requirements
The ACU2 (v2) is shipped with a standard power supply, which provides power to one ACU2
(v2). The power supply should only be connected to a grounded outlet. To rackmount the
ACU2 (v2), you may need to purchase an upgraded power daisy chain. For more information
about the power daisy chain, go to Section 9.1, "Power daisy chain" on page 23.
The power adapter inlet connector is an IEC 320 type C14 or C8, requiring a matching cord
set equipped with an IEC 320 C13 or C7 connector (i.e., female line cord). Country-specific
power connectors must be acquired separately for international use.
Input to PS-A-R-01 100–240 VAC, 50–60 Hz, 1.5 A
RMS
, (120 VAC), 0.75 A
RMS
(240 VAC)
Power In Connector Inside Diameter 0.100", Outside Diameter 0.218", locking, center positive
Connector P/N: Switchcraft 712RA supplied with P2439 Hex Nut
(5/16–32) and P2441 Washer
Mating Connector P/N: Switchcraft 760k
Power Out Con-
nector Inside Diameter 0.080", Outside Diameter 0.218", locking, center positive
Connector P/N: Switchcraft 722RA supplied with P2439 Hex Nut
(5/16–32) and P2441 Washer
Mating Connector P/N: Switchcraft S765k
Power Consumption +15 VDC, 2A (add-in AC/DC converter supplied with each unit)
26 Copyright © 2022 Advanced Simulation Technology inc.
ACU2 (v2) Technical User Guide (Rev. A, Ver. 0)