ASTi ACU2, Техническое руководство пользователя, Страница: 30 / 37

9.0 Rackmount ACU2 (v2)s
The available rackmounting bracket accommodates two ACU2 (v2)s side by side and meas-
ures 1U high and 19" wide. To rackmount the ACU2 (v2), follow these steps:
1. Remove the two bottom corner screws and the top middle screw on the front of the
ACU2 (v2).
2. Use a nut driver (3/16") to remove the two jackscrews from each side of the four con-
nectors.
3. Remove the faceplate with the white lettering and the bezel. Save the bezel for when
you remove the ACU2 (v2) from the rackmount.
4. Place the ACU2 (v2) into the backside of the rackmount. The rackmount fits in place
of the bezel.
5. Place the faceplate on the front side of the rackmount. Install the three black screws,
starting with the top middle screw first for proper alignment.
22 Copyright © 2022 Advanced Simulation Technology inc.
ACU2 (v2) Technical User Guide (Rev. A, Ver. 0)