Astera LED Technology GmbH
Technical Reference
Manual for AX10 SpotMax™
2020-08-26
Page | 18
is always calculated for a full
battery.
EXAMPLE:
If the light is required to light during an eight hour event, and one hour of setup time is
scheduled, then the runtime should be set to nine hours immediately after the first power up.
Please note, that the light should not be stored below 20°C before an event, otherwise the
runtime might be shorter than calculated.
More details on the built in battery can be found at chapter 4.2.
For additional power-savings refer to the
AsteraApp™
manual.
7.16
UNPAIR
CRMX
Once your light is paired to a CRMX or W-DMX
™
transmitter, it cannot be paired to another
one until it is unpaired.
If you wish to unpair your CRMX wireless DMX receiver from a Lumen Radio or W-DMX
™
transmitter, go to UNPAIR CRMX and press enter.
NOTE:
The CRMX receiver is only powered while INPUT SELECT is:
•
set to CRMX wireless DMX
•
or AUTO and either CRMX is latched or no source is latched yet.
For details in INPUT SELECT refer to chapter 7.10.
RUNTIME
20h
Main menu:
UNPAIR CRMX
