ASTEL MXU01, Руководство по эксплуатации

Страница: 5 / 12

5
INSTALLATION
The DMX512 Interface MXU01 kit consists of the following components:

DMX512 Interface MXU01

3 x terminal-block connectors

Operating Instructions with Declaration of Conformity and Warranty conditions
The MXU01 has to be installed on a suitable location.
Avoid the installation in extremely hot places and near appliances generating strong magnetic fields.
The installation has to be realized by a qualified personnel.
Note:

The main DC power supply has to be switched off before installation.
F2A
ASTEL
PROTOCOL
OUTPUT
CONTROL
GND
F2A
DMX SETTINGS
DMX
IN
C
DC IN
D
D
1 2 3 4 5 6 7 8 9 10 11 12
ON
DMX512
LINE
D+
D
GND
OUT
MXU01
Power supply connection
The power supply has to be connected through the switch (not included) and protected by a fuse (not
included) to the DC IN terminal-block connector with correct polarity. The power supply voltage has to
be from 10 - 30Vdc.
ASTEL protocol output connection
The 2 control wires of multi-color RGB lights EQUATOR series or PWM dimmer MDU13 for single-
color lights control have to be connected to the OUT terminal-block connectors.
DMX512 line connection
The DMX512 control wires have to be connected to the DMX IN terminal-block connector.