ASTEL MDU13, Руководство по эксплуатации

Страница: 7 / 12

7
CONTROLS
Single-color models
The push-button switch is used to turn-on and turn-off the underwater light and to control the
luminosity.
Turning on / off
Press the push-button switch momentary.
Dimming
When the light is on, press the push-button switch longer until the desired power is achieved.
Turning on minimum
When the light is off, press the push-button switch longer (e.g. one second or more) until the light is
turned on at minimum power.
Set default
Press the push-button switch for min. 40 seconds or until the light is turned off.
Three-color models
The push-button switch is used to turn-on and turn-off the underwater light and to control the mode of
lighting and luminosity.
When the light is turned-off
the color or mode of lighting can be changed sequentially by pressing
the push-button switch for 2 seconds:
Sequence of lighting
Custom Color
Full RGB
Cool White
Bluish White
Red
Green
Blue
Rainbow Color Spectrum
Turning on /off
Press the push-button switch momentary.
Changing the color or mode of lighting
When the light is turned-off press the push-button switch for 2 seconds.
Setting the Custom Color
At the selected Rainbow Color Spectrum mode press the push-button switch momentary to turn the
light off. After that press the push-button switch for 5 seconds or until the light is switched to the
selected color and then the Custom Color is set and selected.
Dimming
When the light is turned-on press the push-button switch until the desired illumination is achieved. By
another pressing of the push-button switch the luminosity will increase to the maximum illumination.
Set default
Press the push-button switch for min. 40 seconds or until the light is turned off.