78
SYMPTOM
MEASURES
No Power
If the power LED is not lighted, check the below items.
-
Check the power plug and outlet. (Refer to the [Cautions for
safety]
-
Connect the power cord to the power connector of DVR properly.
No camera image
-
Connect the camera cable to the DVR port properly.
-
Check the connected monitor cable with DVR.
(Refer to the
[Rear Panel Configuration]
)
-
Check the camera power and lens setting.
-
As this may be caused by a temporary error, restart DVR.
-
As camera setting may be wrong, initialize the camera and DVR.
※
How to initialize DVR
1. Main Menu > Configuration > Default Load > O.K > O.K
!! Caution: After DVR initialization, DVR setting is returned factory default.
Need to backup the configuration before initialize DVR.
Not work mouse
- USB mouse should be supported PS/2. Check the PS/2 support.
-
Mouse should be connected on port (B) properly.
(Refer to the
[Front Panel Configuration]
)
-
Reset the USB Mouse. (Set on
[System Manager]
)
Not record on DVR
If the recording LED does not flicker, check the below items.
-
HDD should have enough space otherwise could not be recorded.
- Delete data in HDD or change the [HDD OVERWRITE] setting to
[ON].
(Refer to the [
GENEL Setup
] – [
HDD OVERWRITE
])
-
Replace the HDD because the HDD may be failed.
-
Check the recording setup.
Not connected Network
If the network LED does not flicker, check the below items.
-
Check the connected hub or router.
-
Check the network cable and connection.
-
Check the network setup.
8. APPENDIX
8.5 Trouble Shooting
Wednesday, February 29, 12