3
PREFACE
The PLAQUE series underwater lights are
designed to use the latest LED lighting
technology for flush-mount installation where
the most important are low-profile casings to
avoid high water resistance and quality
materials to assure very reliability installation
and operation.
All the models are available in aluminium
bronze casings. The lighting are available in
white, blue and green colors. All the models
are designed with 6 power LEDs and suitable
power supply units.
FEATURES
•
Aluminium Bronze Casing
•
6 Power LEDs Design
•
White, Blue or Green Lighting
•
Tempered Glass Optical Window
•
High-Efficiency Lens
•
Low Power Consumption
•
Over-Temperature Protection
•
Simple Installation
•
Remote Control (optional)
PRECAUTIONS
•
The underwater light has to be installed and
used in accordance with the instructions of
this manual only.
•
The power supply has to be disconnected
before installation.
•
The underwater light is recomended to be
installed around 0.2 m below the waterline
for the best illumination and to avoid over-
heating.
•
Do not try to install or remove the
underwater light while the vessel is in the
water.
•
The optical window has to be cleaned by a
soft brush or cloth. Avoid using any
abrasive or chemical cleaner on the optical
window.
•
Avoid installing the power supply unit in
extremely hot places and near appliances
generating strong magnetic fields.
•
Do turn power off immediately and refer
servicing to qualified service personnel if
the underwater light does not operate
normally following the operating
instructions.
