ASTEK A33606-PCI-01, Руководство пользователя

Страница: 16 / 26

A33606-PCI-01 SAS-2 Expander User Manual
16
Copyright © 2010 by Astek Corporation. All rights reserved Ver. B
J2 is utilized for host connections.
SAS LEDs
A bi-level LED for each SFF-8088 port is located on the front panel. The LED definition is below.
LED LED Color Location
Activity Green Top
Error Yellow Bottom
LED operation is defined below.
LED On Off
Activity Activity is occurring on one of the
SAS lanes in the port. There is no activity on any lane in
the port.
Error One of the SAS lanes in the port
has failed. All SAS lanes in the port are
working.
Front Panel LEDs
A bi-level LED for reporting general expander/enclosure status and is located on the front panel. The LED
definition is below.
LED LED Color Location
Powered Green Top
Fault Yellow Bottom
LED operation is defined below.
LED On Off
Power The board and expander are
powered up. The expander is not powered
properly.
Fault The SAS expander is reporting
an enclosure fault. The system is OK.
Input Power
The A33606-PCI-01 requires 12V power through a standard 4-pin HDD connector.
The table below shows the pinout of the power connector.