ASTECH LDM41E, Руководство пользователя

Страница: 10 / 48

Safety Instructions LDM41E and LDM42E Manual
Page 10 ASTECH GmbH
Do not direct the Laser beam onto persons.
The sensor can use without any additional safety protection.
2.5 Electric Supply
Use only 10 V to 30 V DC (direct voltage) for LDM41E and LDM42E operation.
Use only the specially designated connector terminal for voltage supply.
Specified signal levels must not be exceeded, in order to guarantee correct
data communication.
2.6 Important Operating Advice
To make full use of the system’s inherent performance capabilities and
achieve a long service life, you should always follow these operating rules:

Do not turn the module on if there is fogging or soiling on its optical
parts

Do not touch any of the module's parts with bare hands.

Proceed with care when removing dust or contamination from
optical surfaces!

Prevent shock impacts during transport and use of the LDM41E and
LDM42E

Prevent overheating of the LDM41E and LDM42E.

Prevent major temperature variances during LDM41E and LDM42E
operation

In accordance with IP65 internal protection standards, the LDM41E
an LDM42E is designed to be splash proof and dustproof.

Read these safety and operating instructions with due care and
follow them in practical use.