ASTEC RT130 Скачать руководство пользователя страница 5

Страница: 5 / 64

AU106984 G7B

TO THE OWNER

RT130 TRENCHER

RT130032, RT130030

This manual contains important information about the

safe operation, adjustment and maintenance of your

Astec Trencher. Refer to the Index at the end of this

manual for locating specific items about your machine.

This Trencher conforms to current safety regulations.

Use this manual as a guide. Your Trencher will remain a

reliable working tool as long as it is kept in good working

condition and serviced properly.

Do NOT operate or permit anyone to operate or

service this machine until you or the other persons

have read and understand the safety, operation

and maintenance instructions in this manual. Use

only trained operators who have demonstrated the

ability to operate and service this machine

correctly and safely.

This Trencher, with standard equipment and authorized

attachments, is intended to be used for general earth

moving purposes, handling, ditch digging, etc. Make sure

that the machine is properly equipped and follow the

instructions and safety precautions in this manual.

Do Not use this machine for any application or

purpose other than those described in this manual.

Consult an authorized Astec dealer on changes, additions

or modifications that can be required for this machine to

comply with various country regulations and safety

requirements. Unauthorized modifications will cause

serious injury or death. Anyone making such unauthorized

modifications is responsible for the consequences.

RT130027

This Operator’s Manual is to be stored in the manual

compartment equipped on this machine. Make sure this

manual is complete and in good condition. Contact your

dealer to obtain additional manuals. Contact your dealer

for any further information or assistance about your

machine. Your dealer has Astec-approved service parts.

Your dealer has technicians with special training that

know the best methods of repair and maintenance for

your Trencher.

AFTER DELIVERY CHECK

Two copies of the After Delivery Check are in the back of

this manual. One copy is for you and one copy is for the

dealer. Make sure that your dealer does the After Delivery

Check after the first 50 hours of machine operation.

NOTE:

Your cost for this inspection will be for filters, oil

and/or other accessories. If the dealer comes to your

machine, there can also be a cost for the time and

distance traveled

Содержание RT130

































































Результаты поиска

Содержание RT130

Отзывы:

Бренды по названию

Популярные бренды

ASTEC RT130, Руководство оператора

Результаты поиска

Содержание RT130

Отзывы:

Бренды по названию

Популярные бренды