ASTEC Peterson 6710D, Руководство по безопасности оператора

Страница: 8 / 167

A
B O U T
T
H I S
M
A N U A L
6 6 7 1 0 D G
R I N D E R
O
P E R A T O R
S
A F E T Y
M
A N U A L
1 0 9 4 0 1 B
Important Messages and
Notes
In addition to the hazard alert messages that refer to pos-
sible injury to people, the manual uses the following
type of alert message.
Important
Indicates a situation which, if not noticed or
avoided, may result in equipment or property dam-
age. This message type is also used to call atten-
tion to opportunities for improving machine
performance or efficiency.
N
OTE
: Provides additional information to enhance
understanding of the topic.
Safety Instructions
Be sure to read the entire Safety chapter (“Working
Safely” on page 31) to avoid hazardous operations and
to become aware of hazards that may arise during main-
tenance.
Small Numbers on Figures
In Peterson product manuals, we insert a number, such
as F05555, in small typeface below each graphic to
identify its file name. This number is for editorial use
only.
Units of Weight and Measure
In this manual, U.S. customary units of weight and mea-
sure are stated first, followed by their SI (metric) values
in parentheses. For example, 10 lb (4.5 kg). Many SI
units here have been rounded to avoid an improper
appearance of precision.
U.S. customary units are sometimes stated in words, or
as abbreviations, such as ft for foot or feet, °F for tem-
perature degrees Fahrenheit, and in. for inch or inches,
lbs for pounds, and psi for pounds per square inch.
Ft-lb is an abbreviation for “foot-pounds of torque,”
although in some fields the abbreviation lb-ft, for
“pound-feet of torque” is used.