AST Premmia GX Series, Руководство пользователя

Страница: 41 / 88

Premmia GX Series
41
Adding Memory{ XE "Memory" }{ XE "Adding memory"
}{ XE "DIMMs" }
The memory in your computer is installed in two DIMM (dual in-line memory module)
sockets, labeled DIMM 0 and 1. Depending on how the memory was installed in your
computer when you bought it, you may have an empty socket for you to add more
memory, or you may have to remove a module in order to increase the memory.
Each socket accepts 66MHz (or faster) unbuffered SDRAM modules with 32, 64, 128
or 256MB of memory. The DIMM modules must be gold-plated, with 144 pins and use
3.3V.
When installing memory modules, insert them in socket 0, then 1.
Removing a Memory Module
1. Follow the instructions on page 38 to remove the system cover.
2. If you unplug some of the cables that are attached to the motherboard and drives in
order to get to the DIMM sockets, label the cables so that you will be able to
reinstall them correctly later.
3. Gently move the retaining clip at each end of the DIMM away from the module,
then, holding the module only by the edges, lift it away from the socket.
4. Store the module in an anti-static package.
5. Follow the instructions on page 38 to replace the system cover.