___________________________________________________________________________________
‐
13
‐
12‐1015 rev‐B
User’s Manual Version 14.12
5.5 Set Date and Time
The date and time on the Analysers were set in the Factory during production. Due
to the differences of the Time zone in your Country, you may need to set according
to your local date & time and this can be done by selecting [Set date & time] with
or key and the press and the display shows as in Fig.10 below.
Press or key to change the date and then press to skip to the
next. Do this for the rest like month, year and the time. When the setting is done,
press key to save.
5.6 PC Link
This PC Link mode is used when you wish to connect 12-1015 REV-B to PC to
print or store the results of the last tested vehicle. Once the tester is connected to
the PC with the USB cable provided, select [PC Link] as in Fig. 11 with key
and press key will show as in Fig. 12.
[Exit] to quit.
Setup Menu
Language
LCD Brightness
Printer
Set date & time
PC Link
Erase Memory
Setup Menu
Language
LCD Brightness
Printer
Set date & time
PC Link
Erase Memory
Fig. 9
Set date & time
23
/12/2014 16:48
[Enter] to proceed
[Exit] to quit
Fig. 10
Fig. 11
Fig. 12
