CHANGING
THE
TYPE
OF
TEST
6
SAVING AND LOADING TEST FILES
Test Programs can be saved in files for easy recall of test conditions.
From the Main Menu screen, press the “Setup Tests” soft key.
Hit the “File” soft key from the Setup Tests window. The files currently on the system
will be displayed. (See Figure 3)
(Figure 3. File Setup Screen)
Using the up and down arrow keys, highlight the number of the file slot where
the test sequence is to be saved. Hit the “Save As” soft key and the Create File
screen will appear.
Use the arrow keys (up, down, left, right) to select letters on the virtual keypad or
use the numeric keypad to enter numbers for the file name. When the correct characters
are chosen, use the "Select" soft key to enter the character. When finished, hit the
ENTER key. The system will exit back to the “Setup Tests” screen with the current
file now loaded.
To recall any test file, hit the “File” soft key from the Setup Tests screen.
Use the up and down arrow keys to select the file to be loaded. Hit the “Load”
soft key and the test sequence associated with the file will automatically be loaded.
Use the arrow keys (up, down) to highlight the test to be edited and hit the “Edit” soft key.
Use the soft keys to edit parameters on the right side of the screen. Use the arrows (up,
down, left, right) to scroll between test parameters on the left side of the screen.
Use the number keypad to change a parameter value. Once the desired value has been
entered, press exit to go back to the Setup Tests screen.
Press Exit to go back to the Setup Tests screen. Then Press Exit to go back to the Main
Menu screen. you will be prompted to save your test file.
Deleting a test step is also done from the Setup Tests screen. Highlight the test to be
deleted and hit the delete soft key
Press Enter and the step will be deleted. Press Exit and the step will not be deleted.
