Plug the black cord from the adapter box (P/N 36544) into the
continuity output terminal located on the front panel.
Plug the white cord from the adapter box into the high voltage
output terminal located on the front panel.
Connect the black ground return lead (P/N 2100A-13) to the
front panel return output terminal and connect the other end
of the lead to the dead metal on the chassis of the DUT. Always
check to be sure a good connection has been made between
the DUT and the return clip.
Plug the line cord of the DUT into the adapter box receptacle.
Note
: You may also use the rear output terminals on the back of the
HypotULTRA instead of the front panel output terminals.
The adapter box provides an easy way to connect the HypotULTRA to a
device under test (DUT) terminated in a two- or three-prong power cord.
The following diagram shows how to connect the adapter box to the
HypotULTRA and to the DUT.
Note
: If you need to perform a Ground Continuity test, be sure you
enable the Ground Continuity test type before moving forward.
CAUTION
HIGH VO
LTA
GE
5KV
AC MAX.
6KVDC MAX.
N
L
DO NOT TOUCH THE DEVICE UNDER TEST ONCE YOU START THE TEST
Tap the ENTER ( ) key
to save your selection
Home Screen
File Screen
Add Step
Test Parameter Screen
TAP SETUP TESTS TAP ADD FILE
ADD FILE NAME
SELECT TEST TYPE
TAP TEST TYPE
TAP ADD STEP
Tap the ENTER ( ) key
to save your selection
Swipe left or right to scroll through
parameters and tap parameter values to
edit. After you adjust the parameters, tap the
ENTER ( ) arrow key to save changes.
VIEW PARAMETERS
4
5
TEST SET UP
ADAPTOR BOX CONNECTIONS
