2
:: Introduction
:: KIT Features
:: Additional Features
:: Other Helpful Items
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new RC10TC6. Please take a moment to read through this manual to help familiarize yourself with these steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustra-
tions. New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets
before you start to build.
Team Associated Factory Team TC6 is Area-51’s next generation touring car. Based off decades of race experience with its roots
heavily planted from the bar setting TC3, the TC6 blends the best of performance and adjustability to compete in today’s touring
car racing class. The updated chassis platform considers many hours of testing from Factory Team drivers over the last few race
seasons, keeping focus strictly on brushless motors and LiPo batteries. The resulting layout is optimized for the speeds and grip
levels that are now higher than ever before… the RC10TC6-FT is definitely another Champion by Design from Team Associated!
• Chassis layout optimized for Lithium Batteries and Brushless Motors
o Motor moved toward chassis center by 13mm from TC5
o Ultra narrow LiPo chassis with two battery positions, forward and back
o Servo mounting slots to ensure proper fit of any servo
o Spur gear lowered by 5mm from TC5
o Lengthened top plate with symmetric mounting points for equal flex
o Motor mounts to centralized point in chassis for equal flex
• Common bulkhead layout minimizes spare part cost
• Updated steering system
o More Ackermann options (16 positions total) to fine tune steering feel
o Improved steering input rate for more consistent handling
• VCS3 Shock with hard anodized threaded shock bodies
o Bottom loading seal system for ease of build
o TiN coated shock shaft
o Piston attaches to shock shaft with screw for tight clamping and no slop
o Improved bladder for more consistent build through time
o Threaded collar with fine pitch thread for ease of accurate ride height adjustment
o Increased stroke for more up-travel at wheel
• Long upper link option for increased corner speed
• Hard anodized diff outdrives for low wear and long life
• Cross-compatibility with TC5 suspension components
Y
our new TC6 comes unassembled and requires the following items for completion.
(refer to catalog section for suggestions):
• 1:10th scale electric motor and electronic speed control
• 3.7V-7.4V LiPo, 6.0V LiFe, or 4.8V-7.2V NiMh
• Battery charger (suited for, and particular to, one of the batteries mentioned above)
• 2 channel surface transmitter, 2 channel receiver, and steering servo
• 1:10th scale lexan touring car body
• Lexan specific spray paint for body
• 1:10th scale rubber (or foam) touring car tires
• Silicone Shock Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737)
• Reamer / Hole Punch
• FT Hex Wrenches (AE Part # 1541)
• Hobby Knife
• Needle Nose Pliers
• Wire Cutters • Multi Tool (AE Part #7494)
• Soldering Iron
• Calipers or a Precision Ruler
Содержание RC10TC6 Factory Team
Страница 1: ...1 11 ...
