SERVO SAVER TO
CHASSIS
Place the servo saver
assembly over the pins.
TOP PLATE TO
CHASSIS
Line up the #9130
(9131*) front top plate
with the servo saver pins
and screw holes.
Bolt down the top plate
with two #6923 screws
tightly, then back off
both screws one full
turn. This will allow us to
accomplish step 5.
6292, qty 2
4-40 x 3/8
BAG B
9130, 9131*, qty 1
front top plate
6923, qty 2
4-40 x 3/4
9220, qty 1
front bumper
7673, 6933*, qty 2
4-40 x 5/16
1:1
1:1
1:1
FRONT END TO CHASSIS
Slip front end under top plate, then
push rearward over kickup.
TOOLS USED
step 4
1/16"
step 5
6
step 6
REMOVE THESE
PARTS FOR:
Steps 4-7
9130,
9131*
6923
under top plate
over kickup
6923
BUMPER TO CHASSIS
Add two #6292 screws to secure the front
end assembly to the front kickup.
Go back and tighten the two #6923 screws
from Bag B in step 4.
Bolt on the #9220 bumper with the two
#7673 (6933*) screws.
7673, 6933*
6292
7673, 6933*
9220
6292
2
step 7
BODY MOUNT TO CHASSIS
Secure the #7321 front body
mount to the top plate with two
#6918 screws.
7321
6918
1:1
6918, qty 2
4-40 x 1/2
7321, qty 1
front body mount
