11
P O N T I S B I S T R O TA B L E H Y PA
I N S T R U C T I O N S H E E T
Control and motor system:
JIECANG Linear Motion Technology Co., Ltd.
Adjustment mechanism:
Spindle adjustment in the leg
Synchronization:
electr. synch. by electr. control unit
Tube diameter of the lift columns: 70 mm / 65 mm / 60 mm (outside / middle / inside)
Temperature range at point of use: + 5°C to + 40°C
Max. relative humidity:
80 %
Rated voltage:
230 V ~
Rated frequency:
50 Hz
Intermittent periodic duty:
max. 2 min / 18 min
Maximum load:
Bistro table: 50 kg
Protection class:
IP 20
Maximum power consumption
during lifting operation:
1 lift columns 200 W
Power consumption in
standby mode:
< 0.1 W
Traversing speed:
38 mm/s (without load)
Maximum adjustment range:
650 mm
Control panel up / down:
Standard
Operating panel with
memory function:
Optional (wired)
Noise emission:
< 48 dB(A)
Rating plates are located on the control system housing,
the lift columns and underneath the table top.
Technical data
JS36DS1-3-S / JCB36M - Pontis bistro table HYPA with battery (J1.0)
