TOP ASSEMBLY & ADJUSTMENT
3. Pull the rear knob to release and move the top assembly. Slide it forward
to the front locating knob and it will automatically lock in position. From
this point you will be able to mount A-MOD Desktop/docking equipment
to the top plate via holes and slots from the underside with provided
¼"-20 bolts and washers.
4. The swivel tension to the Motion Arm and Tilt/Swivel Assembly is set
at the factory. This can be adjusted by loosening and/or tightening the
(3) ¼"-20 nuts at each location. Use a
7
⁄
16"
wrench to stabalize the nut
and a
5
⁄
32"
T-handle hex key to turn the bolt.
ATTACH
A-MOD:Bottom View
