Copyright ©2020, 2021, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited
For technical support contact Yale
®
at 800.438.1951 x5033 or [email protected]
3
Installation Instructions
8800 Series
Mortise Lock
80-8800-0016-000 11/21
2
Indicator Variants
4
Rehanding Indicator (If required)
Depending on function and option ordered, indicators are
provided in the following variations, these instructions detail
how to install with cylinder, however other variations follow
similar instructions. (Figure 1)
Contact factory for any questions.
Figure 1
Cylinder - For
installation
on inside or
outside of door.
Thumbturn -
For installation
on inside of
door.
Coin Turn - For
installation
on outside of
door.
No input / blank -
For installation on
inside or outside
of door.
3
Lock Set Configuration
To re-hand lock, see instructions on lock body.
Spindle Cam Position for Locks with Deadbolt
(*includes 8864 function)
Outside
Indicator
Inside Indicator
Door Hand LH/LHRB
Spindle Cam Position for Locks without Deadbolt
(*Does not include 8864 function)
Door Hand LH/LHRB
Note:
Stand on outside of locked door when determining door hand.
Next, verify inside and/or outside indicators are handed correctly, using
Spindle Cam Position chart. (Figure 3) If they are handed correctly, skip to
Step 5 “Prepare Door”.
If they are not handed correctly:
1.
Remove retaining pad and spindle cam from assembly. (Figure 4)
2.
Position spindle cam in correct direction for door hand. (Figure 3)
Important:
•
For thumbturn indicators, make sure thumbturn is positioned in the 12
o’clock direction as shown. (Figure 5)
3.
Slide spindle cam post into correct slot of display slide. (Figure 4)
4.
Re-seat retaining pad into original position.
5.
Return indicator to the vacant/unlocked position for installation.
Thumbturn
Position
Figure 3
Figure 4
Retaining Pad
Spindle cam
Display
slide slot
Door Hand RH/RHRB
Inside Indicator
Outside
Indicator
Inside Indicator
Outside
Indicator
Door Hand RH/RHRB
Outside
Indicator
Inside Indicator
LH
Left Hand
Hinges Left
Open Inward
RH
Right Hand
Hinges Right
Open Inward
LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
RHRB
Right Hand
Reverse Bevel
Hinges Right
Open Outward
Figure 5
Figure 2
Indicator spindle cams MUST be oriented correctly per lock function
and door mounting location.
Verify hand and bevel of door. (Figure 2)
Scan this QR
code for the Yale
Indicator Handing
Charts
