3/16"
1/4-20
for Wood drill 7/32
Machine Screws
#7 Drill, 1/4-20 Tap
Sleeve Nut and Bolt
Drill 9/32 thru from Closer Side
3/8 Drill other Side
(Optional)
Metal
Wood
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Regular Arm
Installation
See Page 2
Regular Arm
Installation
See Page 2
Self Drilling Screws
Wood and Metal
For Wood drill 3/16 hole
* Pilot Hole
Required
Left Hand Door - LH
Right Hand Reverse - RHR
Top Jamb
Installation
See Page 5
Top Jamb
Installation
See Page 5
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Right Hand Reverse - RHR
Parallel Arm
Installation
See Pages
3 & 4
Parallel Arm
Installation
See Pages
3 & 4
Power Adjustment Shaft
Backcheck Valve
Closer
Body
Sweep Valve
Latch Valve
Regular Arm/Top
Jamb Shoe
Connecting Rod
Main Arm
Closer Arm
Insert Cutouts
Cover
Insert
Full Cover
Screw Pack
Thru Bolt and Grommet Nut
Drill 9/32 thru from Closer Side
3/8 Drill other Side
Non Hold Open Models Adjustable (Sizes 1 thru 6) 2501
CA
UTION
CA
UTION
A n
I n c o r r e c t l y
i n s t a l l e d
o r
improperly adjusted door closer can
cause property damage or personal
injury.These installation instructions
should be followed to avoid the
possibility of misapplication or
misadjustment.
!
Hinge Edge of Door
Hinge Edge of Door
Doors should be hung on ball bearing
or anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Always adjust spring power before
adjusting control.
Adjust closing time speed between 3
and 7 seconds from 90° to 0°. Greater
closing times may be required for
elderly or handicapped.
These door closers should
be
installed on the exposed side (weather
side) of exterior doors.
NOT
Installation must be in accordance with
ANSI/BHMA A156.115.
Parallel Arm
Bracket
Hinge Edge of Door
Hinge Edge of Door
#7
80-9325-0025-010 Rev B
2500 Series
Architectural Door Closer
Installation Instructions
An ASSA ABLOY Group brand
