2
500-23700
Revision B
6.
Before handling any board, ENSURE dissipation of any bodily charge.
7.
CHECK placement of all wiring before powering to ensure that moving door parts do
not catch wires and cause damage to equipment.
8.
ENSURE compliance with all applicable safety standards (i.e., ANSI A156.10/A156.19)
upon completion of installation.
9.
DO NOT ATTEMPT any repair of the sensor.
10. AVOID the following concerning unauthorized disassembly or repair:
It may jeopardize personal safety and may cause exposure to the risk of
electrical shock.
It will void the product warranty.
Installation / Wiring / Setup
Installation
1.
MOUNT the WSS using the included mounting ring or in a standard plastic or
metal electrical gang box, as applicable, and depending on the type of door
installation.
NOTE 1:
The weather resistant foam is used as a protective barrier against
the elements.
NOTE 2:
The plastic adapter ring enables the double gang face plate to
attach to various plastic and metal gang boxes.
2.
DO NOT ALLOW contact between the sensor and a metal gang box to prevent
shorting the devices.
3.
ENSURE placement of the device so that motion from the door or other types of
movement do not interfere with the detection zone.
