15
500-22090, Rev A
PROBLEM: Cover does not fit on the lock.
▪
CHECK welding—If the lock chassis was welded to the mounting
surface; verify that there are no welds that extend beyond the
edge of the chassis back plate.
▪
CHECK wire routing to ensure that the placement of the wires is
not inhibiting the proper fit of the cover to the lock chassis.
▪
Cover must be straight on and slid into position (DO NOT TILT).
PROBLEM: Manual override does not work.
▪
CHECK cover to verify that the lock cover is fully seated and
securely fastened in place.
▪
CHECK mortise lock installation.
▪
VERIFY that the compatible cylinder lock is correctly installed
and functions properly—REVIEW installation instructions and
CHECK rotation direction.
▪
Check wire routing to ensure that the placement of the wires does
not impede the rotation of the cam or movement of the latching
mechanism.
▪
CHECK that the GL1 is being used in Fail Locked mode—manual
override does not work in Fail Safe mode.
If any problem persists, call Technical Support at
1-800-624-5625 (toll free).
MagnaCare
®
Lifetime Replacement
Warranty
MagnaCare is the industry’s best warranty, and covers every product
manufactured by Securitron. No registration is required. Product will be
replaced forever, for any reason, including but not limited to installation
error, vandalism, or act of God. Replacement product is shipped the
next day at Securitron’s expense if needed.
For more information, visit www.securitron.com