6
500-17700, Rev D
Figure 2. Plastic Base and Handle Detail
Mount the Handle to the Plastic Base
1. INSTALL the handle onto the base using the two large flathead
Phillips screws.
Connect the Electrical Wiring and Power Supply
NOTE 1:
Figure 3, “TSH Wiring for Fail Safe Electric Lock,” and
Figure 4, “TSH Double Break Wiring,” show a generic use of
the TSH with any type magnetic lock and power supply.
NOTE 2:
When using all Securitron products, the installation is simple.
It should be noted that for any Securitron Magnalock, the red
wire denotes the "+" input and the black wire denotes the “–“
input. Also, the MOV does not need to be installed with any
Securitron Magnalock.
1. CONNECT the electrical wiring in accordance with Table 1, “Sensor
Wiring,” and Figures 3 and 4.
