AQE30E – Module Overview
Data
This is the non-PoE network connection to a non-PoE cam-
era or other non-PoE device. This connector is an RJ45 jack
and accepts a CAT-5 cable.
PoE/Data
This is the PoE input from the network. This will come from
a PoE source such as a AQE Midspan Injector or a PoE Net-
work Switch. This connector is an RJ45 jack and accepts a
CAT-5 cable.
Output Status (Green)
This LED shows the status of the AQE30E PoE Extractor See
the status chart for more information.
PoE Class Selection Jumper
This input selects the class of PoE connected to the PoE/Data
input of the AQE30E.
Leave these terminals open if connecting to a Class 3 (15W) PoE
Source. Place a jumper across these terminals if connecting to a
Class 4 (30W) PoE Source.
Mounting Tab
The mounting tab centers are spaced 3.85" on center. Refer to
the mounting guide (page 1) for mounting details.
12VDC Output
These terminals are the 12VDC output from the AQE30E.
This output can be used to power non-PoE devices such as
cameras. These terminals can accept wire sizes from AWG16
to AWG22. See the Specifications Section for ratings.
AQE30E – Status LED
AQE30E Port Status
LED State
No Primary Power to Unit
OFF
No Connection on PoE/Data Port
OFF
Operation Normal
ON
2
6
4
3
Data
PoE/Data
Output Status
12 VDC –
Open: Class 3 Short: Class 4
1
5
