Overview
The SARGENT
®
Profile Series v.S2 intelligent WiFi products, combined with approved third party software or Lock Management Tool, provide the ability
to manage hardware from a centralized location through a WiFi network. The Profile Series v.S2 provides a broad selection of technologies, features
and mechanical locking means housed in a sleek, architecturally pleasing design. Programming and security management is performed utilizing the
ASSA ABLOY Lock Management Tool (LMT) or a third party access control system. All products utilize a microprocessor based controller with non-volatile
memory to preserve user information.
All technology features are supported by the physical security of a SARGENT ANSI Grade 1 mechanical locking device: Mortise, Bored or Exit. These access
control devices allow for optimal electronic control and are UL Listed for use on fire doors. Trims and finishes are identical among the various technology
offerings (v.S2-PA, v.S2-PK, v.S2-IA, v.S2-IK) allowing for a cost-effective combination and design.
All technologies with a keypad feature have the option of using pin codes as an added measure of security. Each credential can be programmed to operate
the lock in a variety of modes tailored to the opening. Typical modes include Unlock, Extended Unlock, Passage and Panic.
The Lock Management Tool is a Windows
®
-based application that allows the programming, interrogation and overall management of the facility’s Profile
Series v.S2 locks (up to 50) from a centralized location. The LMT application, on a PC, and the Profile Series v.S2 locks communicate using a wireless
(IEEE 802.11 b/g) infrastructure.
This centralized control satisfies the need to protect occupants in a building, including updating access privileges, audit trail reporting, alarms and door
status monitoring (open/close).
About ASSA ABLOY’s Authorized Channel Partner and Certified Integrator Programs
The SARGENT v.S2 is part of a stream of new ASSA ABLOY products moving from traditional mechanical locks to being extensions of access control
systems in facilities. These exciting new technology-rich products require an increase in knowledge to ensure the correct selection and implementation
in various environments.
To aid our customers in this area, ASSA ABLOY has created two programs that provide the necessary training to sell, order, install and service our
technology products, including Integrated Wiegand, IP-enabled and self-configurable intelligent components:
• The Authorized Channel Partner (ACP) program is open to wholesale, contract hardware distributors, and access control manufacturers
who sell ASSA ABLOY’s technology products to security systems integrators and locksmiths, and help with product selection based on the
application. The ACP is for resellers that do not install and service products.
• The Certified Integrator (CI) program provides hands-on training for security systems integrators and network administrators. Not only does
this training familiarize certified integrator candidates on product features and applications, it also gives them valuable experience installing,
commissioning, and troubleshooting the products in a real-world environment. This category extends to End Users that install and manage
their own systems and third party lock installers as well.
Overview and Features
Profile Series v.S2
1
1-800-727-5477 • www.sargentlock.com
Profile Series v.S2 Features & Benefits
Powering Options
• Six (6) AA batteries included for completely wireless applications
• Hard wiring is accomplished with a 3267 Remote Power Supply (sold
separately, see page 11) and ElectroLynx Hinge (sold separately)
S2 Proximity (125 kHz) Product
Accesses per
Door
With Comm
Session(s)/day
Batteries will last
approximately
Low Usage
60 /day
1
22 months
Medium Usage
120 /day
2
14 months
High Usage
300 /day
5
7 months
For more information on the qualifications for becoming an ACP or CI, contact your local ASSA ABLOY Door Security Solutions sales consultant for details.
Note: Higher security products such as iCLASS may experience a slight decrease in
battery life.
Features
Benefits
Utilizes 802.11b/g wireless network infrastructure
Cost-effective installations, no proprietary equipment required;
ideal for hard-to-wire locations
Integrated ANSI/BHMA Grade 1 hardware, available in:
10 Line Bored Lock; 8200 Series Mortise Lock; 80 Series Exit Device
Flexibility to support a variety of openings; industry leading Grade 1 hardware
offers the highest degree of physical security available in access control locks
Intelligence built into lock for local decision making
Lock operates regardless of network status; supports up to 2,400 users
per lock and provides a 10,000 event transaction history/audit trail
Supports HID
®
125 kHz prox or 13.56 MHz iCLASS
®
credentials;
(26 - 39 bit) supports CSN reads for other common 13.56 MHz cards, including
MiFare, DesFire, and Felica
Integrates easily with existing credential systems
Full iCLASS
®
credential authentication
Offers enhanced security through encryption and mutual authentication
Built-in door status monitoring and configurable alarm notifications
Provides real-time alarms for immediate response
Weatherseal gasket and conduit included. Shroud available.
Can be used on a variety of exterior doors
Open architecture design
Facilitates integration with any access control system
Uses six AA batteries
Easy, cost effective deployment and maintenance
Keypad option available
Two-factor authentication offers enhanced security
90669:D 8/01/2013
Copyright © 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibite
d.
FOR
TRAINING
PURPOSES
ONLY
DATED
MATERIAL