17
1
Use the
pq
keys to select a number from the list.
2
Press
3
to confirm. If there was a number already
stored then you will be asked to change the
number, if the slot was empty you will be asked to
enter a new number, confirm by pressing
3
.
3
Enter your phone number and confirm by
pressing
3
.
• Errors can be corrected by pressing
X
to
backspace, pressing
X
repeatedly will take
you back the telephone number list. Telephone
numbers can be deleted in the same manner.
Rec. Address
This menu allows the recording of your address.
The maximum length of message is 10 seconds
which is ample for most messages, when recording
remember to speak clearly and slowly into the
microphone.
1
Press
3
and you will be either asked to record a
new message or change an old one.
2
Press
3
again and follow the on screen
instructions. When you finish recoding remember
to press
3
to stop recording. If you go over the
10 second recording time (indicated by a beep
and a recording is over message) just repeat the
recording procedure again taking care not to go
over the 10 second time limit. The recording is
complete.
Test report
This menu allows you to test the telephone reporting
feature.
• Please check with the call recipients before making
a test call.
• Ensure that the telephone cord is plugged into a
socket.
1
Select Test report and press
3
.
2
A list of numbers will be displayed, select the
number you want to test and press
3
.
3
The control panel will now display call progress.
• The address message and pre-recorded
emergency, burglar and acknowledgement request
messages will be played in a loop for 85 seconds.
• The test can be cancelled at any time by either
pressing the
X
button or the call recipient pressing
“9” on their phone to acknowledge the call. If a
radio DECT or mobile phone is used, remember to
press 9 repeatedly until the call closes.
• Check that the call has been successfully received.
Contactless
This menu allows to manage the contactless tags
credentials to disarm the system.
The following items can be selected.
• Add Tag
• Delete Tag
• Test Tag
Add Tag
This menu allows to pair a new contactless tag to
the panel. It’s possible to add up to 4 tags (1 tag for
each user).
1.
Select Add Tag and press
3
2.
Present a new tag to the panel contactless reader
3.
If the new tag is detected, the panel display that a
new tag has been detected, press
3
to confirm.
4.
Associate the detected tag to one of the the users
from the displayed list and press
3
Delete Tag
This menu allows to delete an existing contactless
tag from the panel.
1.
Select Delete Tag and press
3
2.
Use
st
to select the tag to delete from the
displayed tag list and then press
3
to confirm.
3.
Press
3
to confirm the deletion or
X
to get back
to the tag list.
Test Tag
This menu allows to check if a contactless tag has
been already paired to the panel.
1.
Select Test Tag and press
3
2.
Present the tag to test to the panel contactless
reader
3.
If the tag is scanned and is already in the panel
memory, the tag information will be displayed on
screen.
4.
Press
X
to return to initial menu.
