Copyright © 2016, 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9316-2533-020 Rev 2 02/20
2
• For special applications, a separate door and frame
preparation template is packed with these instructions. Use
this instruction sheet for installation sequence and closer
adjustments only.
• Doors should be hung on ball bearing or anti-friction hinges.
• Door and frame must be properly reinforced.
Mounting Hardware
Door or Frame
Drill
Closer, Soffit Plate:
1/4-14 x 1-1/2 Oval Flat Head Mach. Screw
Wood
3/16" (4.76mm)
Closer, Soffit Plate:
1/4-20 x 3/4 Oval Flat Head Mach. Screw
Metal
Drill #7 (.201 dia. or 5.10mm)
Tap 1/4-20
Closer:
Sleeve Nut and Bolt (SNB)
(optional)
Hollow Metal
9/32" (7.00mm) thru
3/8" (9.50mm) door face opposite to closer
Aluminum or Wood 3/8" (9.50mm) thru
Closer:
Thru Bolt and Grommet Nut (TBGN)
(optional)
All
9/32" (7.00mm) thru
3/8" (9.50mm) dia. x 3/8" (9.500mm) deep,
door face opposite to closer
• Always consult door/frame manufacturer for fastener
compatibility.
• Adjust closing time speed between 4 and 7 seconds from
90° to 0°. Use of door by handicapped, elderly or small
children may require greater closing time.
• These door closers should NOT be installed on exposed side
(weather side) of exterior doors.
• Dimensions are given in inches (millimeters).
ATTENTION:
An incorrectly installed or improperly adjusted door closer can
cause property damage or personal injury. These installation
instructions should be followed to avoid the possibility of
misapplication or misadjustment.
1600 UniTrol Arm Closer
Brackets
Door Holder
Reinforcing Kit
2022
Option for Flush Transom
6190
Option for Standard Frame
1688C Drop Plate
For use with optional cover
1688 Drop Plate
For narrow top rail
Drop Plates
Cover
6191
Option for Deep Reveal
1600P
