Assa Abloy Corbin Russwin DC3210 Series Скачать руководство пользователя страница 7

7

80-9330-3003-152 04/18

DC3210 Series Closer

A11 or A12 Heavy Duty Spring Stop Parallel Arm

Installation Instructions

Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.  

All rights reserved. Reproduction in whole or in part without the express written 

permission of Corbin Russwin, Inc. is prohibited.

For installation assistance contact Corbin Russwin 

1-800-543-3658 • [email protected]

3

Adjustments

Adjustments (Figure 8) 

(3/32 Allen Wrench Provided)

Closing Speed Valve (Figure 9)

To adjust speed of door closing from fully 
open to a position 2 to 5" from closed, turn 
Closing Speed Valve CLOCKWISE to SLOW 
closing, COUNTER-CLOCKWISE to SPEED 
closing. 

Latching Speed Valve (Figure 10)

After closing speed has been obtained, turn 
latching speed valve CLOCKWISE to SLOW 
latching or COUNTER-CLOCKWISE to SPEED 
latching for last 2 to 5 of door travel.

NOTE: Set combination of CLOSING and 
LATCHING speeds to between 3 and 7 
seconds Use of door by handicapped, 
elderly or small children, may require 
even greater closing time. 

Backcheck Intensity Valve (Figure 9)

Turn valve COUNTER- CLOCKWISE to reduce 
backcheck or CLOCKWISE to increase 
backcheck. (Backcheck should be set to give 
a soft cushioning action, not a sudden stop). 

Delayed Action Valve (Figure 9)

Turn valve CLOCKWISE to SLOW closing, 
COUNTERCLOCKWISE to SPEED closing. 
Delayed action may be adjusted from 20 
seconds to 90 seconds, depending on degree 
of door swing. Delay occurs at the beginning 
of the door closing cycle from fully open down 
to 70°, where the closing speed valve then 
begins its control.

Delayed Action

Option 

M-71

Backcheck

Latch

Sweep

LATCHING

SPEED

VALVE

Power
Size
Stamp

Date Stamp

BACKCHECK

INTENSITY VALVE

OPTION M71

DELAYED

ACTION VALVE

CLOSING

SPEED VALVE

SPRING POWER ADJUSTER

(5/16" WRENCH or SOCKET)

(FLAT TIP SCREWDRIVER)

Rotate

To Decrease

Hold Open

Force

To Increase

Hold Open

Force

Hold Open

“On”

Hold Open Force

HOLD OPEN ADJUSTMENTS - A12 ARMS ONLY

Hold Open

“Off”

Figure 8 

Figure 9 

Figure 10 

Figure 11 

Содержание Corbin Russwin DC3210 Series









Отзывы: