6
(617417440)
FM226A 10/18
Access 800
™
TCAC2 Series
Keypad Programming Instructions
Locks
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
4
M800 Programming
To Deactivate / Reactivate “Beep” With Key Stroke
99# Master Code or Supervisor Code*
Yellow LED blinks
30# 0# 0# (Off) or 1# (On)
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Program Door Name into Keypad
99# Master Code*
Yellow LED blinks
43# Door Name (up to 5 digits)#
Yellow LED blinks
0#
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Interrogate Transaction Log
To output the last 1000 transactions:
99# Supervisor or Master Code*
Yellow LED blinks
70# 0# 0#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED goes out
When printing finishes, the green LED will turn off and the yellow LED will blink slowly.
*
Yellow LED goes out
Hold an infrared printer up to the infrared LED. (Figure 3)
An HP82240B Infrared Printer can be used to download
information from the keypad to a printout.
Note: The highest Seq. # is the programming request to
output the entries. The balance of Sequence numbers
are the actual entries. (Figure 4)
Infrared Printer
To LED location
793F109
Door Name 5666
Seq
User
Trans
0005 001
—
0004 003
—
0003 003
—
Varies
0002 020
—
0001 003
—
Door Name
Transaction Number
User Number
Transaction Type
Figure 3
Figure 4
